🤖 This article was translated by AI.
This article explains the compliance check that Boond performs before sending each electronic invoice, and how to fix detected errors: for each message, you will find its cause and the correction to make. It is intended for users who manage Billing in Boond. Electronic Billing is available on all Boond offers: Legacy, Core, Advanced, and Enterprise.
Prerequisites
Prerequisite: Electronic Billing must be configured in Boond. See the article How to configure Electronic Billing in Boond with B2BRouter? or, if you use Pennylane, the article How to use Electronic Billing with Pennylane in Boond?. You can also use the article Set up Electronic Billing in Boond: the checklist to help you.
1 - Why does Boond check my electronic invoice before sending?
Boond checks your electronic invoice before sending to detect any potential issue before it is discovered by your client, and to prevent your invoice from being rejected. When you send an electronic invoice from an invoice card, to B2BRouter or to Pennylane, Boond automatically performs a compliance check just before sending.
This check is automatic: you do not have to trigger anything. If your invoice is compliant, the sending proceeds normally and no message is displayed.
2 - What does Boond's compliance check verify?
Boond's compliance check verifies your electronic invoice at three levels, from the most general to the most specific:
The file structure: Boond checks that your invoice data file is properly built.
European rules: More than 200 rules common to all Europe check that the essential invoice information is present and consistent (number, date, currency, amounts, VAT, bank details).
French rules: If the Agency issuing the invoice is located in France (mainland, Guadeloupe, Martinique, La Réunion), additional rules apply, such as mandatory legal notices, electronic billing address, or SIREN number. For an Agency located outside France, only European rules apply.
3 - What is the difference between an error and a warning?
When the compliance check detects an item to fix, Boond informs you directly on the invoice card, before sending. Each reported item is accompanied by an explanation. There are two levels:
Error: your invoice would be rejected as is. The invoice is not sent until the error is fixed.
Warning: an item deserves your attention, but it does not prevent the invoice from being sent.
4 - How to fix an error and resend my electronic invoice?
To fix an error reported by the compliance check and resend your electronic invoice:
Read the error message displayed on the invoice card, and find the matching line in sections 5 to 8 of this article.
Correct the information at the indicated location (legal Agency, your client’s billing details, order or invoice).
If the invoice is no longer in Creation state, set it back to Creation: the electronic invoice file is then regenerated with your corrections.
Resend the invoice with Send and declare (or Send via Pennylane if your Registered Platform is Pennylane).
Remember to set the invoice back to Creation state
Important: When you correct information for your legal Agency or your client’s billing details, set the invoice back to Creation state before resending it. Without this step, the invoice may be resent with the old information, and the same error will appear.
If the error persists after correction, or if you do not find the message in this article, contact Boond support with the invoice number and the displayed error message.
5 - Errors related to your legal Agency information
The errors in this section concern your company information, entered in your Boond legal Agency: SIREN, SIRET, VAT number, IBAN, electronic billing address, and mandatory notices.
The SIREN or SIRET of my legal Agency is invalid
Displayed messages: "[BR-FR-09_BT-29] The SIRET must contain 14 digits and start with the SIREN", "[BR-FR-10_BT-30] The seller’s SIREN (ram:ID) is mandatory and must be exactly 9 digits" or "[BR-FR-32-LEGALID] Any legal identifier of a Party with schemeID = '0002' MUST be 9 digits".
Cause: The SIREN or SIRET of your legal Agency is empty or incorrectly entered (spaces, letters, label).
Correction: In Administration > Legal Agency > your Agency > Information tab, enter only the digits: 9 digits for the SIREN, 14 digits for the SIRET (which starts with the SIREN). Then set the invoice back to Creation state and resend it.
The VAT number of my legal Agency is not valid
Displayed message: "The VAT number is not valid."
Cause: The VAT number of your legal Agency is incorrectly entered.
Correction: In Administration > Legal Agency > your Agency > Information tab, check the VAT number and enter it without spaces or label. If the number is correct and the error persists, contact Boond support.
The IBAN of my legal Agency is not entered.
Displayed message: "The IBAN is not filled in" or "IBAN is empty".
Cause: The IBAN of your legal Agency is empty or its format is invalid.
Correction: In Administration > Legal Agency > your Agency > Billing tab, enter or correct the IBAN of your legal Agency, then set the invoice back to Creation state and resend it.
The electronic billing address of my company is empty or incorrectly formatted (BT-34).
Displayed messages: "[BR-FR-13_BT-34] BT-34 is mandatory. Current value: BT-34=""." or "[BR-FR-23_BT-34] The electronic address (ram:URIID) does not match the allowed format".
Cause: BT-34 is your company’s electronic billing address. It is empty when the invoice was generated before the connector was activated, or when no active connector is linked to the invoice’s legal Agency. It is incorrectly formatted when the SIRET of your legal Agency contains spaces or unauthorized characters.
Correction if the address is empty: Set the invoice back to Creation state, then resend it: the electronic invoice file is regenerated with the electronic billing address. If the error persists, check that an active electronic billing connector is linked to the invoice’s legal Agency.
Correction if the address is incorrectly formatted: In Administration > Legal Agency > your Agency > Information tab, check the SIRET and enter only the 14 digits, without spaces. Then set the invoice back to Creation state and resend it.
Payment notices are missing (PMT, PMD, discount).
Displayed messages: "[BR-FR-05_BT-22_PMT] The notice regarding collection fees (PMT code) is missing", "[BR-FR-05_BT-22_PMD] The notice regarding late penalties (PMD code) is missing" or "Payment method text is mandatory for DGFiP declaration".
Cause: The mandatory notices of the electronic invoice (Flat-rate collection fee, Late penalty, Discount) or the payment method are not entered on the invoice’s order.
Correction: Enter the mandatory notices in Administration > Legal Agency > your Agency > Billing > Legal notices, click Propagate to orders, and check the payment method of the order. Then set the invoice back to Creation state and resend it. For details, see the article How to configure Electronic Billing in Boond with B2BRouter?, section 6.
Payment information or terms exceed 255 characters.
Displayed messages: "Payment information is too long (maximum is 255 characters)" or "Payment terms is too long (maximum is 255 characters)".
Cause: The text of the payment notices (Flat-rate collection fee, Late penalty, Discount) or the payment terms of the order exceeds 255 characters.
Correction: Shorten each text to a maximum of 255 characters, including spaces, in the legal Agency or on the order, then resend the invoice.
6 - Errors related to your client
The messages in this section concern your client: their billing details in Boond, or their registration with a Registered Platform.
The SIRET or SIREN of my client is empty
Displayed messages: "[BR-FR-09_BT-46] The SIRET must contain 14 digits and start with the SIREN. SIRET: "", SIREN: ""." or "[BR-FR-32-LEGALID] Any legal identifier of a Party with schemeID = '0002' MUST be 9 digits".
Cause: The SIRET of your client is not entered, or it is incorrectly entered, in the billing details used by the invoice.
Correction: In Your client’s Company card > Billing tab > Details sub-tab, enter your client’s SIRET (14 digits, no spaces). Then set the invoice back to Creation state and resend it.
My client is not found on the Peppol network (warning)
Displayed message: "The receiver is not registered in the Peppol network to receive invoices."
Level: This message is a warning. It does not prevent the electronic invoice from being sent.
Cause: The addressing identifier entered for your client was not found on the Peppol network. Your client may not yet have an active Registered Platform, or the identifier is incorrectly entered.
What you can check:
Check your client’s addressing identifier in their billing details, including any suffix and case sensitivity.
Search for the identifier in the Central Directory or in the Peppol directory.
If the identifier is incorrectly entered, correct it in your client’s billing details, set the invoice back to Creation state and resend it.
If your client does not yet have an active Registered Platform, contact them to find out when they will be able to receive electronic invoices.
No suitable document type was found for my client
Displayed message: "No suitable document type was found for this receiver."
Cause: Your client’s electronic billing address does not work for receiving: your client does not have an active Registered Platform, or their addressing identifier is incorrectly entered.
Correction: Check your client’s addressing identifier (including suffix and case sensitivity) in their billing details and in the Peppol directory, then check with your client that they have an active Registered Platform.
My client does not accept a French electronic invoice format
Displayed message: "Between French companies with DGFiP tax reporting, only a France-regulated format can be sent over Peppol (Factur-X FR, UBL/CII CIUS FR), and the receiver does not publish any."
Cause: Between French companies, only a French electronic invoice format can be sent. Your client’s Registered Platform has not declared any of these formats.
Correction: Contact your client to activate a French electronic invoice format with their Registered Platform, then resend the invoice.
7 - Errors related to the invoice content
The errors in this section concern the content of the invoice itself: date, billing period, lines, references, and attachments.
The date of my invoice is in the future
Displayed message: "When tax declarations must be issued, invoices with a future date cannot be issued according to the tax administration’s time zone."
Cause: An electronic invoice cannot be sent with a date later than today’s date, Paris time.
Correction: Wait for the invoice date to send it, or correct the invoice date to today’s date, then resend it.
The billing period of my invoice is inconsistent
Displayed message: "[BR-29] If the start date of the billing period (BT-73) and the end date of the billing period (BT-74) are both indicated, the end date of the billing period (BT-74) must be later than or equal to the start date of the billing period (BT-73)."
Cause: The end date of the billing period is earlier than the start date.
Correction: Correct the billing period so that the end date is equal to or later than the start date, then resend the invoice.
Single-day period with Pennylane
Note: With Pennylane, a billing period of a single day (start date equal to end date) is refused.
A line on my invoice has a negative unit price
Displayed messages: "[BR-27] The net price of the item (BT-146) must NOT be negative" or "[BR-FR-DEC-03_BT-146] The amount "<negative amount>" is invalid. It must: - be a strictly positive number (without the “-” sign) […]".
Cause: A line on the invoice, for example a discount or adjustment, has a negative unit price. In an electronic invoice, the unit price must always be positive.
Correction: On the relevant line, enter the unit price as positive and the quantity as negative. Example: for a €100 discount, enter a unit price of 100 and a quantity of -1, instead of a unit price of -100 and a quantity of 1. Then resend the invoice.
The referenced invoice number contains a forbidden character
Displayed message: "[BR-FR-02_BT-25] The referenced invoice identifier (ram:IssuerAssignedID) contains unauthorized characters."
Cause: The number of the invoice your invoice refers to (for example, the invoice corrected by a credit note) contains an unauthorized character. Only letters, numbers, and the symbols + - _ / are allowed, without spaces.
Correction: Check the referenced invoice number and remove unauthorized characters if possible. If not possible, contact Boond support with the invoice number.
An attachment to my invoice is too large
Displayed message: "Attachments This file cannot be uploaded because it exceeds the maximum allowed file size (52428800)"
Cause: The invoice attachments exceed the maximum allowed size, which is 50 MB.
Correction: Reduce or compress the invoice attachments so they do not exceed 50 MB, then resend the invoice. Boond does not offer automatic compression.
8 - The message "An error occurred" is displayed
Displayed message: "An error occurred"
The message "An error occurred" does not specify the cause of the error. Contact Boond support with the relevant invoice number: the support team will identify the cause with you.
9 - FAQ
Does a warning prevent my electronic invoice from being sent?
No, a warning does not prevent your electronic invoice from being sent. It indicates an item that deserves your attention. Only an error blocks sending until it is fixed.
Does the message "The receiver is not registered in the Peppol network" block the sending of my invoice?
No, the message "The receiver is not registered in the Peppol network to receive invoices" is a warning: it does not prevent your electronic invoice from being sent. However, check that your client’s addressing identifier is correctly entered, including any suffix.
Do I have to manually launch the compliance check?
No, you do not have to launch the compliance check. Boond launches it automatically just before each electronic invoice is sent, with B2BRouter as well as with Pennylane.
Does the compliance check apply to an Agency located outside France?
Yes, the compliance check also applies to invoices from an Agency located outside France, but only European rules are checked. French rules apply only to Agencies located in France (mainland, Guadeloupe, Martinique, La Réunion).
I fixed the error but it still appears, what should I do?
If the error still appears after correction, set the invoice back to Creation state before resending it: the electronic invoice file is then regenerated with your corrections. If the error persists, contact Boond support with the invoice number and the error message.
How do I enter a discount on an electronic invoice?
To enter a discount on an electronic invoice, use a positive unit price and a negative quantity. A line with a negative unit price blocks the sending of the electronic invoice.

